Softened water equipment can be widely used in steam boilers, hot water boilers, exchangers, evaporative condensers, air conditioners, direct gas turbines and other systems of softened water supply. Can also be used for hotels, restaurants, offices, apartments and other domestic water treatment and food, beverage, brewery, laundry, printing and dyeing, chemical, pharmaceutical and other industries softened water treatment. Before has been widely used in a variety of steam boilers, hot water boilers, heat exchangers, steam condensers, air conditioners, direct combustion engines and other equipment and systems of circulating water supply. In addition, it is also used as pretreatment of domestic water treatment, food, electroplating, medicine, chemical industry, printing and dyeing, textile, electronics and other industrial water treatment as well as desalination system.

Softened water equipment application maintenance:

Raw water quality conditions should be consistent with the general sodium ion exchange water treatment equipment requirements; equipment installed indoors, in order to prevent resin freezing parts and components rust, electrical short circuit failure, the ambient temperature should be above zero, and no steam, more dry and clean ; After the device is in place, re-tighten all the fixing bolts again, the panel of the distribution board should be grounded; the upper and lower bolts of the pull-up bar fixing block on the rotary valve can not be loosened, the exchange column can not impact; the time relay does not need to be adjusted while working, , It must be cut off the power and prevent the motor, switchboard, limit switch water; operation, while water supply, outage, water and electricity are also off; keep the equipment clean, refueling part of the lack of oil, run not careful Touch the pulley to avoid an accident.

Now on the market there is a fully automatic softened water equipment, the device by the advanced process control device, accurate and reliable operation, alternative manual operation, fully automated conversion of all aspects of water treatment. High efficiency and low energy consumption, operating costs and economy. As the softener overall design is reasonable, so that resin exchange capacity can be fully exerted, the device uses jet-type salt, instead of salt pump, reducing energy consumption.